1. Definitio Fundamentalis et Proprietates Structurales
Fercula UCP (Fercula Pulvinorum(cum Inserto) sunt unitates praecompositae, quae insertum ferreum intra basim ferream fusam vel chalybeam pressatam continent. Inter proprietates praecipuas sunt:
• Superficies Exterior Sphaerica: Diameter exterior fulcri designum sphaericum habet, facultatem autoalignandi ±3° permittens.
• Configuratio Praesignata: Sigilla gummea ordinaria (configuratio RS vel 2RS) praesidium secundum gradum IP54 contra ingressum pulveris et aquae praebent.
• Involucrum Standardizatum: Normae ISO 113:2015 congruens, permutabilitatem inter spatia foraminum montandi inter varias marcas praestat.
2. Principia Operandi et Proprietates Mechanicae
2.1 Mechanismus Transmissionis Oneris
Translatio oneris fit per elementa volubilia (sphaeras ferreas) inter anulos interiores et exteriores:
• Onera Radialia: Transmittuntur secundum radium sustentaculi (fere 70% capacitatis oneris constituentes).
• Onera Axialia: Vires axiales unidirectionales (≈20% capacitatis oneris radialis) accommodant.
2.2 Proprietates Tribologicae
• Coefficiens frictionis volubilis infimus: 0.001–0.003
• Celeritas maxima: 3000 rpm cum lubricatione adipe lithio fundata (vita adipis 2000 horarum @ 70°C).
3. Scenaria Applicationis Typica
3.1 Machinae Agriculturae
• Arbres impulsorii messis combine (temperatura operandi: -30°C ad 80°C)
• Reductores dentatae vermis systematis irrigationis (tegumenta anticorrosionis requirunt)
3.2 Industria Ciborum Processuum
• Unitates impulsorias taeniae transportatoriae (variantes chalybis inoxidabilis FDA-congruentes)
• Mechanismi manubrii in machinis involucris (resistentes oneribus cyclicis)
3.3 Instrumenta Fodinarum
• Cribra vibrantia in contritoribus (sigilla labyrinthica supplementaria requirunt)
• Cylindri otiosi taeniae transportatricis (solutiones lubricationis speciales pro locis pulverulentis)
4. Normae Selectionis Technicae
| Numerus Unitatis Ferentis | Dimensiones (in.) vel (mm) | Clavus adhibitus mm/in. | Numerus Ferculi | Pondus (kg) | |||||
| d | h | a | e | b | s1 | ||||
| UCP204 | 20 | 33.3 | 127 | 95 | 38 | 13 | M10 | UC204 | 0.6/0.67 |
| UCP204-12 | Tres quartae partes | 1-5/16 | 5 | Tres tres quartae | 1-1/2 | Dimidium | 3/8 | UC204-12 | 0.61/0.68 |
| UCP205 | 25 | 36.5 | 140 | 105 | 38 | 13 | M10 | UC205 | 0.81 |
| UCP205-13 | XIII/XVI | 1-7/16 | Quinque et dimidium | 4-1/8 | 1-1/2 | Dimidium | 3/8 | UC205-13 | 0.81 |
| UCP205-14 | VII/VIII | 1-7/16 | Quinque et dimidium | 4-1/8 | 1-1/2 | Dimidium | 3/8 | UC205-14 | 0.81 |
| UCP205-15 | XV/XVI | 1-7/16 | Quinque et dimidium | 4-1/8 | 1-1/2 | Dimidium | 3/8 | UC205-15 | 0.81 |
| UCP205-16 | 1 | 1-7/16 | Quinque et dimidium | 4-1/8 | 1-1/2 | Dimidium | 3/8 | UC205-16 | 0.81 |
| UCP206 | 30 | 42.9 | CLX | 121 | 44 | 17 | M14 | UC206 | 1.23 |
| UCP206-17 | 1-1/16 | 1-11/16 | VI-XIX/LXIV | 4-3/4 | 1-47/64 | 43/64 | Dimidium | UC206-17 | 1.25 |
| UCP206-18 | 1-1/8 | 1-11/16 | VI-XIX/LXIV | 4-3/4 | 1-47/64 | 43/64 | Dimidium | UC206-18 | 1.25 |
| UCP206-19 | 1-3/16 | 1-11/16 | VI-XIX/LXIV | 4-3/4 | 1-47/64 | 43/64 | Dimidium | UC206-19 | 1.25 |
| UCP206-20 | 1-1/4 | 1-11/16 | VI-XIX/LXIV | 4-3/4 | 1-47/64 | 43/64 | Dimidium | UC206-20 | 1.25 |
| UCP207 | 35 | 47.6 | CLXVII | 127 | 48 | 17 | M14 | UC207 | 1.55 |
| UCP207-20 | 1-1/4 | 1-7/8 | VI-IX/XVI | 5 | 1-7/8 | 43/64 | Dimidium | UC207-20 | 1.613 |
| UCP207-21 | 1-5/16 | 1-7/8 | VI-IX/XVI | 5 | 1-7/8 | 43/64 | Dimidium | UC207-21 | 1.613 |
| UCP207-22 | 1-3/8 | 1-7/8 | VI-IX/XVI | 5 | 1-7/8 | 43/64 | Dimidium | UC207-22 | 1.613 |
| UCP207-23 | 1-7/16 | 1-7/8 | VI-IX/XVI | 5 | 1-7/8 | 43/64 | Dimidium | UC207-23 | 1.613 |
| UCP208 | 40 | 49.2 | CLXXXIV | 137 | 54 | 17 | M14 | UC208 | 1.87/1.98 |
| UCP208-24 | 1-1/2 | 1-15/16 | Septem et quartam partem | 5-13/32 | 2-1/8 | 43/64 | Dimidium | UC208-24 | 1.89/2 |
| UCP208-25 | 1-9/16 | 1-15/16 | Septem et quartam partem | 5-13/32 | 2-1/8 | 43/64 | Dimidium | UC208-25 | 1.89/2 |
| UCP209 | 45 | 54 | 190 | 146 | 54 | 17 | M14 | UC209 | 2.16/2.25 |
| UCP209-26 | 1-5/8 | 2-1/8 | VII-XV/XXXII | Quinque et tres quartae partes | 2-1/8 | 43/64 | Dimidium | UC209-26 | 2.17/2.26 |
| UCP209-27 | 1-11/16 | 2-1/8 | VII-XV/XXXII | Quinque et tres quartae partes | 2-1/8 | 43/64 | Dimidium | UC209-27 | 2.17/2.26 |
| UCP209-28 | 1-3/4 | 2-1/8 | VII-XV/XXXII | Quinque et tres quartae partes | 2-1/8 | 43/64 | Dimidium | UC209-28 | 2.17/2.26 |
| UCP210 | 50 | 57.2 | 206 | CLIX | 60 | 20 | M16 | UC210 | 2.7 |
| UCP210-29 | 1-13/16 | Duo et quartam partem | Octo et octava pars | Sex et quarta pars | 2-3/8 | XXV/XXXII | 5/8 | UC210-29 | 2.7 |
| UCP210-30 | 1-7/8 | Duo et quartam partem | Octo et octava pars | Sex et quarta pars | 2-3/8 | XXV/XXXII | 5/8 | UC210-30 | 2.7 |
| UCP210-31 | 1-15/16 | Duo et quartam partem | Octo et octava pars | Sex et quarta pars | 2-3/8 | XXV/XXXII | 5/8 | UC210-31 | 2.7 |
| UCP210-32 | 2 | Duo et quartam partem | Octo et octava pars | Sex et quarta pars | 2-3/8 | XXV/XXXII | 5/8 | UC210-32 | 2.7 |
| UCP211 | 55 | 63.5 | 219 | CLXXI | 60 | 20 | M16 | UC211 | 3.3/3.46 |
| UCP211-32 | 2 | Duo et dimidium | 8-5/8 | 6-47/64 | 2-3/8 | XXV/XXXII | 5/8 | UC211-32 | 3.45/3.61 |
| UCP211-33 | 2-1/16 | Duo et dimidium | 8-5/8 | 6-47/64 | 2-3/8 | XXV/XXXII | 5/8 | UC211-33 | 3.45/3.61 |
| UCP211-34 | 2-1/8 | Duo et dimidium | 8-5/8 | 6-47/64 | 2-3/8 | XXV/XXXII | 5/8 | UC211-34 | 3.45/3.61 |
| UCP211-35 | 2-3/16 | Duo et dimidium | 8-5/8 | 6-47/64 | 2-3/8 | XXV/XXXII | 5/8 | UC211-35 | 3.45/3.61 |
| UCP212 | 60 | 69.8 | 241 | CLXXXIV | 70 | 20 | M16 | UC212 | 4.65/4.9 |
| UCP212-36 | Duo et quartam partem | 2-3/4 | 9-1/2 | Septem et quartam partem | 2-3/4 | XXV/XXXII | 5/8 | UC212-36 | 4.65/4.9 |
| UCP212-37 | 2-5/16 | 2-3/4 | 9-1/2 | Septem et quartam partem | 2-3/4 | XXV/XXXII | 5/8 | UC212-37 | 4.65/4.9 |
| UCP212-38 | 2-3/8 | 2-3/4 | 9-1/2 | Septem et quartam partem | 2-3/4 | XXV/XXXII | 5/8 | UC212-38 | 4.65/4.9 |
| UCP212-39 | 2-7/16 | 2-3/4 | 9-1/2 | Septem et quartam partem | 2-3/4 | XXV/XXXII | 5/8 | UC212-39 | 4.65/4.9 |
| UCP213 | 65 | 76.2 | 265 | 203 | 70 | 25 | M20 | UC213 | 5.66/5.97 |
| UCP213-40 | Duo et dimidium | 3 | 10-7/16 | 8 | 2-3/4 | 63/64 | Tres quartae partes | UC213-40 | 5.72/6.03 |
| UCP213-41 | 2-9/16 | 3 | 10-7/16 | 8 | 2-3/4 | 63/64 | Tres quartae partes | UC213-41 | 5.72/6.03 |
| UCP214 | 70 | 79.4 | 266 | 210 | 72 | 25 | M20 | UC214 | 6.3 |
| UCP214-42 | 2-5/8 | 3-1/8 | 10-15/32 | VIII-XVII/LXIV | 2-27/32 | 63/64 | Tres quartae partes | UC214-42 | 6.3 |
| UCP214-43 | 2-11/16 | 3-1/8 | 10-15/32 | VIII-XVII/LXIV | 2-27/32 | 63/64 | Tres quartae partes | UC214-43 | 6.3 |
| UCP214-44 | 2-3/4 | 3-1/8 | 10-15/32 | VIII-XVII/LXIV | 2-27/32 | 63/64 | Tres quartae partes | UC214-44 | 6.3 |
| UCP215 | 75 | 82.6 | 275 | 217 | 74 | 25 | M20 | UC215 | 6.79 |
| UCP215-45 | 2-13/16 | Tres et quartae partes | 10-53/64 | 8-35/64 | 2-29/32 | 63/64 | Tres quartae partes | UC215-45 | 6.79 |
| UCP215-46 | 2-7/8 | Tres et quartae partes | 10-53/64 | 8-35/64 | 2-29/32 | 63/64 | Tres quartae partes | UC215-46 | 6.79 |
| UCP215-47 | 2-15/16 | Tres et quartae partes | 10-53/64 | 8-35/64 | 2-29/32 | 63/64 | Tres quartae partes | UC215-47 | 6.79 |
| UCP215-48 | 3 | Tres et quartae partes | 10-53/64 | 8-35/64 | 2-29/32 | 63/64 | Tres quartae partes | UC215-48 | 6.79 |
| UCP216 | 80 | 88.9 | 292 | 232 | 78 | 25 | M20 | UC216 | 8.48 |
| UCP216-49 | 3-1/16 | Tres et dimidium | 11-1/2 | 9-1/8 | 3-1/16 | 63/64 | Tres quartae partes | UC216-49 | 8.48 |
| UCP216-50 | 3-1/8 | Tres et dimidium | 11-1/2 | 9-1/8 | 3-1/16 | 63/64 | Tres quartae partes | UC216-50 | 8.48 |
| UCP216-51 | III-III/XVI | Tres et dimidium | 11-1/2 | 9-1/8 | 3-1/16 | 63/64 | Tres quartae partes | UC216-51 | 8.48 |
Tempus publicationis: Aug-10-2025
